Pipe Solutions

Dedicated Flange Adaptors

Specifications

PN	PN10-PN40 (ANSI CL#150-400)
DN	63.0 to 3,020.0 mm
Medium	Water, wastewater, sewage, seawater
Flange Drilling	Accordance to EN1092-1, PN10, PN16, PN25 or PN40. Available on request for ANSI B16 Class 125/ 150, BS10 Table D/ E
Adaptor Flange	Mild Steel to BS EN10025-2:2004 Grade S235JR. SS is available on request
End Flange	Mild Steel to BS EN10025-2:2004 Grade S235JR. SS is available on request
Gasket	EPDM
Stud Bolt	Mild Steel to BS EN ISO898-1:2009 Property Class 4.8. Stainless steel A2 or A4 is optional
Nut	Hot Dipped Galvanized Steel. Stainless steel A2 or A4 is optional
Washer	Hot Dipped Galvanized Steel. Stainless steel A2 or A4 is optional
Coating	Min 250μ Epoxy Coating RAL 5017 blue, WRAS approved
Application	Pumping stations \| Utilities \| Wastewater treatment plants \| Seawater desalination plants \| Power plants \| Chemical plants \| Industrial
Features	ISO 9001 certified In-house production design, utilizing the latest CAD softwares, supported by technical staff and finite element analysis programmes Stringent raw material quality control and certification from international test laboratories Product approvals held for many countries worldwide In house quality control at all stages of production, with Hydrostatic Test Facilities

Dedicated Flange Adaptors

If you need to join plain-ended pipes to flanged valves, fittings, and other flanged components, LAMINAR Dedicated Flange Adaptors are an ideal solution.

LAMINAR Restraint Flange Adaptors can also be supplied for situations where end pull-out force is a concern.

When placing an order for LAMINAR Dedicated Flange Adaptors, it’s essential to provide the required information, including pipe outside diameter and applicable flange standards, to avoid any errors in flange selections.

Note that the thickness of LAMINAR Flanges may differ from the mating flange since the Flange Adaptor’s flange will not be subject to the full end or side thrust. If you’re using HDPE and GRP pipes, LAMINAR Flange Adaptors with full sleeves can be supplied to prevent end pull-out.