Pipe Solutions

Universal Flange Adaptors

Specifications

PN	PN10-PN16
DN	58.0 to 462.0 mm
Medium	Water, wastewater, sewage
Flange Drilling	Accordance to EN1092-1, PN10 or PN16. Available on request for ANSI B16 Class 125/ 150, BS10 Table D/ E
Tolerance on Angular Deflection	Max +/- 6 degree
Adaptor Flange	Ductile Iron BS EN1563 GJS 500/7
End Flange	Ductile Iron BS EN1563 GJS 500/7
Gasket	EPDM or NBR
Stud Bolt	Stainless steel A2, A4 is optional
Nut	Stainless steel A2, A4 is optional
Washer	Stainless steel A2, A4 is optional
Coating	Min 250μ Epoxy Coating RAL 5017 blue, WRAS approved
Application	Pumping stations \| Utilities \| Wastewater treatment plants \| Seawater desalination plants \| Power plants \| Chemical plants \| Industrial
Features	ISO 9001 certified In-house production design, utilizing the latest CAD softwares, supported by technical staff and finite element analysis programmes Stringent raw material quality control and certification from international test laboratories Product approvals held for many countries worldwide In house quality control at all stages of production, with Hydrostatic Test Facilities

Universal Flange Adaptors

Our Universal Flange Adaptors are designed to join pipes of different outside diameters (OD) with the same or different nominal bore.

The corrosion protection scheme for Laminar’s universal flange adaptors is available in Fusion Bonded Epoxy (FBE), Epoxy paint and Galvanized finish as standard. Other coatings options are available on request.

The universal flange adaptors’ application ranges from the transmission of potable water, wastewater and sewage to the marine, mining, oil, gas and general industrial sectors.

LAMINAR Universal Gaskets, EPDM or NBR materials, are designed to provide a leak-tight seal while allowing thermal expansion and contraction of the pipe up to 5mm per gasket. However, using lubrication with a suitable, non-toxic soap solution is advised to facilitate the installation and avoid any potential damage due to load while seating. The universal flange adaptors can be manufactured with double or full sleeves to prevent end pullout on PE and GRP pipes.